OMRON
Home >> Download >> OMRON >> Catalog Download >> OMRON K2CU-F80A-EGS datasheet PDF catalog K2CU-F80A-EGS PDF datasheet

OMRON K2CU-F80A-EGS datasheet PDF catalog K2CU-F80A-EGS PDF datasheet

Brand: OMRON
Product model: K2CU-F80A-EGS
Name: Heater Element Burnout Detector
Sort: PDF datasheet
File language: English
File size: 1.26MB
Time specification: Instantaneous type.
Current setting range: 50 to 160 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage K2CU-F80A-EGS PDF datasheet.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase K2CU-F80A-EGS
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions K2CU-F80A-EGS PDF datasheet. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Type: Medium-sensitivity models.
Sensed current: 500 mA/1,000 mA(switchable).
Type: Delayed models.
Operating time: 0.3/0.8 s (switchable) K2CU-F80A-EGS PDF datasheet.
Economical, Compact, High-performance,
DIN 48 × 48-mm Ground Fault Relay for Low,
Voltages.
Performs continuous monitoring and detection of ground faults,
in low-voltage circuits due to the deterioration of insulation in,
electrical devices.
Higher reliability ensured with improved resistance to high-fre,
quency noise when used for inverter loads.
Ground Fault Relays and through-type ZCTs (zero-phase current,
transformers) are mutually compatible.
The through-type ZCTs are equipped with test terminals,
allowing operation tests for Ground Fault Relays to be performed withease. Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (S-TMR, HOLD, RESET) is equipped with.
External power 80mA DC12V.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
Transistor: -; NPN openn collector (HH, H, PASS, L, LL) K2CU-F80A-EGS datasheet PDF catalog.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
Digital rotating pulse meter with high speed measurement for 50kHz.
Action determine the color, can switch thhe green / Red 2 kinds of color display K2CU-F80A-EGS datasheet PDF catalog.
Measurement of 50kHz high speed pulse.
Can rotate the encoder and a variety of ON/OFF pulse signal, up to 50k
Related products
OMRON
Heater Element Burnout Detector
K2CU-F10A-C
OMRON Heater Element Burnout Detector K2CU-F10A-C
Control supply voltage: 100 VAC With voltage
OMRON
Heater Element Burnout Detector
K2CU-F10A-F
OMRON Heater Element Burnout Detector K2CU-F10A-F
Control supply voltage: 220 VAC With voltage
OMRON
Heater Element Burnout Detector
K2CU-F40A-D
OMRON Heater Element Burnout Detector K2CU-F40A-D
Control supply voltage: 110 VAC With voltage
OMRON
Heater Element Burnout Detector
K2CU-F10A-CGS
OMRON Heater Element Burnout Detector K2CU-F10A-CGS
Control supply voltage: 100 VAC With voltage