Unit type: CJ1 Basic I/O Units.
Product name: Transistor Output Units.
Specifications: Output type, Sourcing;
I/O points, 32 outputs;
Maximum switching capacity, 24VDC,
0.5A Short-circuit protection;
Commons, 16 points, 1 common;
External connection, MIL connector.
No. of words allocated: 2 words CPM1A-10CDT-D-V1 HOST CONNECTION MANUAL.
Current consumption: 5V, 0.15A; 24V, --.
Standards: UC1, N, L, CE CPM1A-10CDT-D-V1
A Wide Range of Basic Output,
Units for High Speed Output,
and Different Applications.
These Output Units receive the ,
results of output instructions ,
from the CPU Unit and perform ON/OFF,
control for external devices.
High-speed Output models CJ1W-OD213 and,
CJ1W-OD234 can help to increase system.
throughput CPM1A-10CDT-D-V1 HOST CONNECTION MANUAL. Required for Analog Input and Output Units: For one Analog Unit.Name: Three-tier Screw Terminal Block.
8 inputs/8 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CPM1A-10CDT-D-V1 HOST CONNECTION MANUAL.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. I/O Cable (for I/O to Interface Racks) 30 m (L) CV500-CN322Power supply: DC power supply.
Output method: Transistor output source type.
Inputs points: 6 points.
Outputs points: 4 points.CPU Unit: CP1L-EM CPU Units with 30 Points.
Specifications: CPU type, Memory capacity: 10K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Power supply, DC power supply; Outputt method, Transistor output(sinking);
Inputs, 18; Output, 12 CPM1A-10CDT-D-V1 Manual.
High Performing Programmable Controller with Embedded Ethernet.
"CP1L-EM" and "CP1L-EL" has a standard-feature Ethernet port.
"CP1L-M" and "CCP1L-L" has a standard-feature peripheral USB port CPM1A-10CDT-D-V1 Manual.
Function blocks (FB) allow you to build up modular structure and,
programming of ladder diagrams.