OMRON
Home >> Products >> OMRON >> Master slave station products >> EtherCAT remote I/O terminal >> GX-EC0241 | OMRON Analog I/O Terminal 2-tier Terminal Block Type GX-EC0241

GX-EC0241 | OMRON Analog I/O Terminal 2-tier Terminal Block Type GX-EC0241

OMRON GX-EC0241 Manual And Instructions
GX-EC0241 datasheetPDF datasheet
GX-EC0241 PROGRAMMING MANUAL
GX-EC0241 INSTRUCTION MANUAL
GX-EC0241 Safety Precautions

OMRON GX-EC0241 Product information and technical parameters:
Brand: OMRON
Name: Analog I/O Terminal 2-tier Terminal Block Type
Model: GX-EC0241
EtherCAT-compatible encoder input terminal which,
enables high-speed and accurate control.
Two counter function available.
Pulse count within 32 bit range.
Maximum input pulse frequency of 4MHz,
(Line driver input after quadrature).
High-speed network EtherCAT enables,
high-speed and accurate control.
Selectable two input types:
Open collector input and line driver input.
Built-in two external latch inputs,
and one reset input.
Selectable node address settings: setting with,
rotary switches and setting on tool software.
Detachable screw terminal will facilitate,
the maintenance work.

Name: Slice I/O Units; Digital I/O Units.
Specifications: AC Input 4 points.
Standards: CE, UC1, L.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system OMRON GX-EC0241.
A wide variety of CompoNet Slave Units,
contribute to system size reduction GX-EC0241
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Name: Slice I/O Units; Digital I/O Units.
Specifications: 4 outputs NPN.
Standards: CE, UC1, L, N OMRON GX-EC0241.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error OMRON GX-EC0241. Specifications: I/O;
NPN (input: + common, output: - common);
16 inputs/16 outputs.
I/O connections: MIL connector.
Rated internal circuit power supply voltage:
Supplied from the communications connector.
Rated I/O power supply voltage: 24 VDC.
Very Compact 16-/32-point Remote Terminals.
Used in combination with Interface,
Conversion Boards (e.g., D-Sub) to,
connect to a wide range of interfaces.
35 x 60 x 80 mm (W x D x H). Independent type, the function of the built-in controller is not RS-232C, the maximum 256 points.Name: Bit Slave Units with e-CON Connectors.
Specifications: Outputs; 2 outputs; PNP.
Simple and Intelligent Bit Slaves,
with Industry-standard e-CON connectors.
Slave Units capable of 2-point bit-level distribution.
The I/O power supply is ssupplied from the communications,
power in the previously connected flat cable, and has a,
short-circuit detection function for protection GX-EC0241.
Industry-standard e-CON connectors.
Short-circuit protection safeguards the network,
from I/O short circuits GX-EC0241.
Simple communications connections,
with flat cable and connectors.
Bit-level distribution to support,
essentially any application.


...More relevant models >>>>