OMRON
Home >> Products >> OMRON >> Energy saving/Environmental protection testing equipment >> EQUO environmental sensor >> ZN-TH11-S | OMRON Next-Generation Production Environment Sensors ZN-TH11-S

ZN-TH11-S | OMRON Next-Generation Production Environment Sensors ZN-TH11-S

OMRON ZN-TH11-S Manual And Instructions
ZN-TH11-S datasheetPDF datasheet
ZN-TH11-S User's Manual

OMRON ZN-TH11-S Product information and technical parameters:
Brand: OMRON
Name: Next-Generation Production Environment Sensors
Model: ZN-TH11-S
Item (Measured particle diameter): Air Thermo Sensor,
For temperature / humidity measurement.
Make your entire production environment visible.
Multi-point monitoring of environmental data and central control.

Item (Measured particle diameter): Air Particle Sensor,
Dust measurement type, 5 µm (10 µm), 20 µm (30 µm), 50 µm min.
Make your entire production environment visible.
Multi-point monitoring of environmental data and central control. Item: Sensor head 1.5 m type.
Easy temperature and humidity control with an SD Card OMRON ZN-TH11-S. Easy temperature and humidity control with an SD Card. Simple monitoring of the use of electricity to support energy saving measures ZN-TH11-S
On behalf of the use of the mechanical equipment, the measurement of the initial voltage, current,
Cumulative quantity, invalid power, power factor, frequency.
To achieve a simple record with a memory card. (with memory card function model)
The measurement data can be stored in the main body, and the centralized monitoring and management can be carried out in the communication network OMRON ZN-TH11-S.
Wide 45mm miniaturization, simple set to the DIN guide. Rated primary current: 50 A.
Rated secondary current: Special output.
Installation: Installed separately.
High-performance Power Monitor Suitable for On-panel Mounting and Display.
Assists Energy-saving Analysis OMRON ZN-TH11-S.
Energy classification for wasted standby and stopped power.
(Classification based on external inputs is also supported.)
Power and current can be measured simultaneously.
Measurement of flow rates with a pulse conversion function.
Simple temperature measurements with Temperature Sensor included in the Unit.
High-precision Measurements.
Measurement of generated power (regenerative power),
leading reactive power, lagging reactive power, and consumed power.
Power measurements on the primary side of inverters,
which are widely used to save energy.
Automatic range switching for accurate measurement of standby and stopped power.
Energy-saving Functions.
Conversion to monetary cost. (Also used for classified standby and stoppped power ZN-TH11-S. )
Alarm outputs can be selected for active power, reactive power,
regenerative power, current, voltage, or power factor.
The Power Monitor can log measurement data and supports Modbus communications.
Installation and Settingss ZN-TH11-S.
Direct measurement of three-phase, four-wire, 400-V line voltage.
Simple measurements without voltage wiring.
Incorrect voltage wiring detection.


...More relevant models >>>>