OMRON
Home >> Products >> OMRON >> Power/other peripheral devices >> UV-LED illuminator >> ZUV-H30MC 0.3M | OMRON Smart Curing System ZUV-H30MC 0.3M

ZUV-H30MC 0.3M | OMRON Smart Curing System ZUV-H30MC 0.3M

OMRON ZUV-H30MC 0.3M Manual And Instructions
ZUV-H30MC 0.3M datasheetPDF datasheet
ZUV-H30MC 0.3M datasheetPDF datasheet

OMRON ZUV-H30MC 0.3M Product information and technical parameters:
Brand: OMRON
Name: Smart Curing System
Model: ZUV-H30MC 0.3M
Type: Standard head; --.
Cable length: 0.3 m.
Cost Revolution Led by UV Curing.
System.
Minimal heat damage thanks to UV-LED irradiation.
New UV LEDs with much higher brightness mounted in heads.
Greater irradiation power to reduce bonding tact time.
Usage of LEDs that have a long lifetime of 40,000,
hours* drastically reduces running costs.
Ultra compact body that is approximately 1/8th the size,
of a conventional lamp system.
Equipped with a color LCD that makes settings simple and reliable.

Time specification: Inverse type.
Current setting range: 8 to 26 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON ZUV-H30MC 0.3M.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase ZUV-H30MC 0.3M
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions OMRON ZUV-H30MC 0.3M. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Model: PY (back-mounting), page 15, Wrapping terminals.
Number of pins: 11 pins.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection OMRON ZUV-H30MC 0.3M.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available. Type: Reverse wiring.
Cable length L: 3.0 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Type: open type.
Structure: DIN guide rail mounting type.
Capacity: 50W.
Output voltage: 12V.
Output current: 4.3A.
Built in OMRON''s original new under voltage detection function of small size,
Also contribute to the miniaturization of the device.
Built in support for determining the abnormal causes of the new under voltage detection function.
(S8VM- - P - 24A - racy type)
Power failure detection function with built-in hint output voltage abnormity.
(type 300/600/1500W)
A total of 8 kinds of capacity of 29 models, a complete range of products.
Meet RoHS instructions including lead free.
Humanized design of anti - shedding screw for terminal stage.
(except for the 300/600/1500W output terminals)

Support finger touch protection to prevent electric shock ZUV-H30MC 0.3M.
DIN guide rail simple installation.
Safety standards: CSA, C22.2 No.14/No.60950-1 UL508/60950-1,
EN50178, EN60950-1.
(300/600/1500W type, safety standard is not applicable whhen the fan is replaced by the customer ZUV-H30MC 0.3M. )
Meet F47-0200 SEMI standards. (200V input)
High harmonic current limit: EN61000-3-2. (except for type 15/30W)


...More relevant models >>>>