Type: Spot lens.
Spot: Spot dia.: 4 mm.
Cost Revolution Led by UV Curing.
Minimal heat damage thanks to UV-LED irradiation.
New UV LEDs with much higher brightness mounted in heads.
Greater irradiation power to reduce bonding tact time.
Usage of LEDs that have a long lifetime of 40,000,
hours* drastically reduces running costs ZEN-10C1AR-A-V2 REFERENCE MANUAL.
Ultra compact body that is approximately 1/8th the size,
of a conventional lamp system ZEN-10C1AR-A-V2
Equipped with a color LCD that makes settings simple and reliable. Optical system: diffuse type.
Detection distance: 50 positive and negative 5mm.
Beam shape: point beam.
Beam diameter: diameter of 50 m.
Resolution: 0.8 M.
Cable length: 2m. Classification: Standard ZEN-10C1AR-A-V2 REFERENCE MANUAL.
Contact gap: G (0.5 mm).
Drip-proof terminal protective cover: Not provided.
Actuator: Spring plunger; High OP.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available ZEN-10C1AR-A-V2 REFERENCE MANUAL.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Item: Sensor Head - Controller Extension Fiber Cable,
(flexible cable) (Fiber Adapter ZW-XFC provided).
Cable length: 20m.
To achieve a compact Sensor Head and high-resolution measurements,
the ZW Series uses a white light confocal principle to detect objects.
This principle is described below. Power supply voltage: DC24V.
Control output: PNP output. Actuator: Sealed (Booted); Sealed roller plunger; AC.
Mounting: Side mounting.
Approved standards: UL CSA.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models have also been added,
to the series ZEN-10C1AR-A-V2 Manual.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
Switches with gground terminals have CE marking ZEN-10C1AR-A-V2 Manual.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)