OMRON
Home >> Supply >> OMRON C200H-IDS21 Information on the factory automation identification system, there are classified samples can be providedID sensor module C200H-IDS21
Search
Information sort

OMRON C200H-IDS21 Information on the factory automation identification system, there are classified samples can be providedID sensor module C200H-IDS21


I/O Control UnitNO. OF I/O SLOTS: 5 SLOTS
Remote use, microwave transmission for long distance.
ID sensor unit is a kind of non contact type identification system,
For unified products, unified production and unified control data,
Effectively produce quantity of products.
Information on the factory automation identification system, there are classified samples can be provided C200H-IDS211.Output method: Relay.
Inputs: ---.
Outputs: 16.I/O points: 512 pts.
Program capacity(words): 7.2 K C200H-IDS21.
DM capacity (words): 6 K.
RS-232C port: YES.Name: MIL Connectors.
Specifications: Inputs;
16 inputs ; NPN; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced C200H-IDS21.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error OMRON C200H-IDS21. Model: C200H-OC224N.
No. of points: 8 pts.
Specifications: 2A, 250VAC/24VDC(For resistive loads)Independent commons.I/O bits: 960 (Expan-sion Racks: 2).
Program capacity: 20K steps OMRON C200H-IDS21.
Data memory capacity: 64K words (DM: 32K words, EM: 32K words ×1 bank)Model: CPM2C-20CDT1C-D. CPU Unit: Units with 20 I/O points.
2 Fujitsu connectors.
Inputs: 12 inputs.
Outputs: 8 outputs.
Input type: 24 VDC.
Output type: sourcing transistor OMRON C200H-IDS21.
Internal clock: --.Specifications: 16 Kwords with clock.Connection type: Screw - ST connector.
Description: Controller link repeater unit (wire to graded-index glass fibre).Name: DC Power Supply Unit.
Power supply voltage: 24 VDC.
Output capacity: 5 VDC output capacity, 5.3A;
26 VDC output capacity, 1.3A;
Total, 40W.
Options: 24 V DC service power supply, No;
RUN output, No.
Standards: UC1, N, L, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables. Unit type: CS1 Special I/O Units.
Name: High speed Counter Units.
Specifications: Countable channels,
2; Encoder A and B inputs,
pulse input Z signals, Open collector,
Input voltage: 5VDC,12VDC, or 24VDC,
(up to 2 axes for 5 V or 12 V input),
RS-422 line driver;
Max. counting rate, 50kHz, 500kHz.
No. of unit numbers allocated: 4.
Current consumption: 5V, 0.45A; 26V, --.
Standards: UC, N, L, CE.
High-Speed, Flexible Control With A,
Wide Array of Features.
Equipped with 2 or 4 Counters and counts,
over a maximum binary range of 32-bits.
Accepting input pulse frequencies of up,
tto 500 kHz allows precise control of fast motions C200H-IDS21.
The Unit is equipped with 4 Digital Inputs,
4 Digital Outputs and 28 Soft Outputs.
A maximum response time of 0.5 ms guarantees,
high-speed closed loop control of applications.
Related supply information