OMRON
Home >> Products >> OMRON >> Master slave station products >> DeviceNet >> DRT2-ID32B-1 | OMRON Board Terminals with MIL Connector DRT2-ID32B-1

DRT2-ID32B-1 | OMRON Board Terminals with MIL Connector DRT2-ID32B-1

OMRON DRT2-ID32B-1 Manual And Instructions
DRT2-ID32B-1 datasheetPDF datasheet
DRT2-ID32B-1 PROGRAMMING MANUAL
DRT2-ID32B-1 INSTRUCTION Manual

OMRON DRT2-ID32B-1 Product information and technical parameters:
Brand: OMRON
Name: Board Terminals with MIL Connector
Model: DRT2-ID32B-1
Specifications: Inputs, PNP (- common), 32 inputs.
I/O connections: MIL connector.
Rated internal circuit power supply voltage:
Supplied from communications connector.
Rated I/O power supply voltage: 24 VDC.
First Board-type Terminals for Smart Slaves!
Easily modified to handle an array of I/O interfaces,
and eliminates much on-site wiring.
User boards attach easily to the DRT2-@D32BV(-1) using screws.

I/O classification: Temperature inputs.
I/O points: 4 inputs.
I/O connections: Terminal block.
Power supply voltage: 24 VDC.
Input specification: Platinum resistance thermometer.
Temperature Input Units for use with MULTIPLE I/O TERMINAL.
Four inputs.
Thermocouples and platinum resistance thermometer models,
are available OMRON DRT2-ID32B-1.
Conversion time is only 250 ms for 4 inputs.
The Configurator can be used to calibrate temperatures DRT2-ID32B-1
The circuit section can be removed, so rewiring isn’t,
required during maintenance.
DIN track mounting. Input capacity: 16 points.
Internal I/O common: PNP.
ON voltage: 15 VDC min.
(between each input terminal and the G terminal)
OFF voltage: 5 VDC max.
(between each input terminal and the G terminal)
OFF current: 1 OMRON DRT2-ID32B-1. 0 mA max.
Input current: 6.0 mA max./input (at 24-VDC),
3.0 mA min./input (at 17-VDC).
ON delay: 0.1 ms max.
OFF delay: 0.2 ms max.
Input filter value: Without filter, 0.5 ms, 1 ms,
2 ms, 4 ms, 8 ms, 16 ms, 32 ms. (Default setting: 1 ms)
Number of circuits per common: 8 points/common.
Input indicators: LED display (yellow).
Isolation method: Photocoupler isolation OMRON DRT2-ID32B-1.
I/O power supply method: Supply by I/O power supply.
Input device supply current: 100 mA/point.
Unit power supply current consumption: 90 mA max.
(for 20.4 to 26.4-VDC power supply voltage)
I/O power supply current consumption: 5 mA max.
(for 20.4 to 26.4-VDC power supply voltage)
Weight: 370 g max.
Expansion functions: No.
Short-circuit protection function: No.
A common terminal is provided for each contact.
It eliminate the needs for relay terminal blocks.
It is unnecessary to share the common terminal,
among multipple contacts DRT2-ID32B-1.
Easy-to-find wiring locations.
Detachable screw terminal block facilitates the maintenance.
Input response time can be switched for high-speed processing.
Selectable node address setting methods: setting with rotary,

switch and with tool software DRT2-ID32B-1.
When setting the nodes with rotary switch, setting is easy and,
node identification becomes possible for maintenance.


...More relevant models >>>>