OMRON
Home >> Products >> OMRON >> Energy saving/Environmental protection testing equipment >> EQUO environmental sensor >> ZN-DPX21-S Series | OMRON Thermo-Humidity Station ZN-DPX21-S Series

ZN-DPX21-S Series | OMRON Thermo-Humidity Station ZN-DPX21-S Series

OMRON ZN-DPX21-S Series Manual And Instructions
ZN-DPX21-S Series datasheetPDF datasheet

OMRON ZN-DPX21-S Series Product information and technical parameters:
Brand: OMRON
Name: Thermo-Humidity Station
Model: ZN-DPX21-S Series
Easy temperature and humidity control with an SD Card.

Product name: Clamp type CT, Connector: For connecting the branch cable,
Cable length: 0.2 m.
Power supply: Battery/DC cable.
Easy and Quick "Checking Power"at the Worksite. Rated primary current: 5 A.
Rated secondary current: Special output.
Installation: Installed separately.
High-performance Power Monitor Suitable for On-panel Mounting and Display OMRON ZN-DPX21-S Series.
Assists Energy-saving Analysis ZN-DPX21-S Series
Energy classification for wasted standby and stopped power.
(Classification based on external inputs is also supported.)
Power and current can be measured simultaneously.
Measurement of flow rates with a pulse conversion function.
Simple temperature measurements with Temperature Sensor included in the Unit OMRON ZN-DPX21-S Series.
High-precision Measurements.
Measurement of generated power (regenerative power),
leading reactive power, lagging reactive power, and consumed power.
Power measurements on the primary side of inverters,
which are widely used to save energy.
Automatic range switching for accurate measurement of standby and stopped power.
Energy-saving Functions.
Conversion to monetary cost. (Also used for classified standby and stopped power OMRON ZN-DPX21-S Series. )
Alarm outputs can be selected for active power, reactive power,
regenerative power, current, voltage, or power factor.
The Power Monitor can log measurement data and supports Modbus communications.
Installation and Settings.
Direct measurement of three-phase, four-wire, 400-V line voltage.
Simple measurements without voltage wiring.
Incorrect voltage wiring detection. Type: KM50-C intelligent monitor.
Application circuit: single phase 2 wire system AC100 ~ 240V; single phase 3 wire system AC100/200V;
Three-phase 3 wire system AC100 ~ 240V.
Power supply voltage sharing: sharing AC100 to 240V with the measured voltage input.
Shape: 48 (H) * 48 (W) * 84 (D).
Communication: RS-485.
Protocol: ompoWay/F: the number of communication nodes 31 Modbus: the number of communication nodes 99 (shared).
Energy classification function (industry initiative).
Show the 3-STATE function through the 3 color display energy saving room for improvement.
Equipped with easy to grasp the room for energy saving and convenient 3-STATE functiion ZN-DPX21-S Series.
3-STATE function refers to the use of the state power, the cumulative power is divided into operation / standby / stop 3 types of functions.
2 and 3-STATE function linkage, can operate / standby / stop 3 points for individual output
(determine the object can be selected from power, current, voltage)
Pulse input count, pulse input ON time, unit power consumption measurement ZN-DPX21-S Series.


...More relevant models >>>>
Related model